Clear-Com FreeSpeak Beltpack - Manual (Page 40)

Clear-Com Communication Systems
Eclipse Wireless Communication System
2 - 6
• Press button C to select Sidetone level and use the scroll buttons to
set the Sidetone level on the slider then press button C to return to
the previous menu.
• The Headphones menu showing the default Normal Loudness setting
selected.
In normal mode the noise levels are set to the same levels as in
release 1.5.7, with Bass and Treble set to 0dB. Press button C to
switch to the ‘LOUD’ mode.
In ‘LOUD’ mode the noise levels can be 10dB higher than in release
1.5.7 as the volume can be higher. The Bass level is reduced for
clarity in a noisy environment and set at -12dB. The Treble level is
increased for clarity in a noisy environment and set at +12dB.
Warning: The loud setting also turns off the headset limiter as
indicated on the menu.
Press button C again to switch the Custom setting. This setting allows
the bass and treble levels to be set by the user and has a maximum
level 10dB greater than that in release 1.5.7.
Use the scroll buttons to select ‘BASS’ to set the Bass level.