Clear-Com AES-6 - Manual (Page 22)

Vitec Group Communications
AES-6 Digital Interface Instruction Manual
2 - 8
CABLE PINOUTS
The CAT5 cables used to connect either type of AES-6 rear card
(AES-6-CX and AES-6-RJ) to a matrix use the following pinout.
Table 2-4: AES-6 to Matrix Wiring
Standard straight-through CAT5 cables may be used for this purpose.
The pinout for the CAT5 cable to connect an AES-6-RJ to a panel is
given in the table below.
Table 2-5: AES-6 to Panel Wiring
PIN NUMBER WIRE COLOR FUNCTION
1 White/Orange Data Transmit (Tx+)
2 Orange Data Transmit (Tx-)
3 White/Green Audio Output (+)
4 Blue Audio Input (+)
5 White/Blue Audio Input (-)
6 Green Audio Output (-)
7 White/Brown Data Receive (Rx+)
8 Brown Data Receive (Rx-)
PIN NUMBER WIRE COLOR FUNCTION
1 White/Orange not used
2 Orange not used
3 White/Green Tx (+)
4 Blue Rx (+)
5 White/Blue Rx (-)
6 Green Tx (-)
7 White/Brown not used
8 Brown not used