Clear-Com AES-6 - Manual (Page 19)

Vitec Group Communications
AES-6 Digital Interface Instruction Manual 2 - 5
Figure 2-8: AES-6-RJ Connected for Mono Third Party Equipment
When a matrix port is connected to an AES-6 interface for audio only
operation the matrix port should be configured as “AES Mono” in ECS
(Setup Matrix Hardware).
Stereo Configuration
For stereo use i.e. separate left and right ear audio streams only half
the RJ45 ports can be used with the sources being connected to
alternate ports. For each stereo RJ45 connection two RJ-45 matrix
connections are required which must be specially configured in ECS.
Currently it is required that the pair of ports comprising a single stereo
channel must be adjacent ports. The first port of the pair must be
configured as a V-Series or 4000 Series panel and the second port
must be configured as type “Panel Aux”.