Data port, Reset button, Data port -7 – Clear-Com AES-6 User Manual

Page 13: Reset button -7, Figure 1-3, Figure 1-4

Text mode
Original mode

Vitec Group Communications
AES-6 Digital Interface Instruction Manual

1 - 7

Figure 1-3: AES-6 DIP Switch Settings for Clear-Com Panels

Figure 1-4: AES-6 DIP Switch Settings for Third Party Equipment

DATA PORT

The data port is a 3.5mm jack socket allowing the AES-6 to be
connected to a PC for software/diagnostics download. To connect to a
PC a PD4007 download cable is required.

RESET BUTTON

The reset button is behind a hole in the front panel to prevent it being
accidentally pressed. To press the reset button insert a narrow rod or
stiff piece of wire such as a paper clip through the hole to press the
reset button.