Clear-Com AES-6 - Manual (Page 16)

Vitec Group Communications
AES-6 Digital Interface Instruction Manual
2 - 2
• 4222E
The V-Series panel types supported by this card are:
• V12LD
• V12PD
• V24LD
• V24PD
• V12LDD
This card is for use with installation where the data connections to the
4000 Series II and V-Series panels or third party equipment are made
using coaxial cable rather than CAT5 cable. Each audio source is
connected to a BNC port on the card and the corresponding RJ-45 port
is connected to a port on a matrix serial port. All format conversion
between the 4000 Series II or V-Series panel and the matrix is carried
out by the AES-6 card.
Figure 2-5: AES-6-CX Card Connected for Mono
For stereo use i.e. separate left and right ear audio streams only half
the BNC ports can be used with the panels being connected to
alternate BNC ports. For each stereo BNC connection two RJ-45
matrix connections are required which must be specially configured in