Clear-Com AES-6 - Manual (Page 20)

Vitec Group Communications
AES-6 Digital Interface Instruction Manual
2 - 6
Figure 2-9: AES-6-RJ Connected for Stereo Panels
When operating in stereo mode the matrix will send two audio streams
to the panel consisting on the main intercom audio and auxiliary audio.
The panel will return the panel microphone audio to the matrix.
Figure 2-10: Stereo Audio Flow in AES-6 Systems
When configuring V-Series panels for stereo mode in ECS the Audio
Mixer should be set to “Layout Binaural coax/AES” or “Layout Binaural
coax/AES using D25”. For Elcipse 4000 series panels the appropriate
links must be configured on the main PCB and PDE4536B card. Refer
to the Eclipse 4000 panel installation guide part STA0530 rev 4 or later
for information on stereo configuration.