Clear-Com RS-602 (No longer available) - Manual (Page 37)

3 5 R S - 6 0 2 / 6 2 2 B E L T P A C K
Channel Exclusive, Function 8
This function causes the beltpack to operate with only one active
channel. You select one of the beltpack’s two channels to operate as the
“exclusive” channel.
When you select an exclusive channel, the beltpack’s two sets of talk
and call buttons operate for only the selected channel. The selected
channel’s volume-control knob operates, while the beltpack’s second
volume-control knob does not operate.
To select an “exclusive” channel:
1. Press and hold the setup button until the setup information window
displays a “P” and then release the button.
2. Repeatedly press the Call A button until “8” appears in the display.
3. Press the appropriate channel’s talk button (Talk A or Talk B) to
toggle “channel exclusive” either on or off for that channel.
• A channel’s talk light reveals the function’s status for that channel.
If the talk light is on, “channel exclusive” is on for that channel; if
the talk light is off, “channel exclusive” is off for that channel.
• You can select either channel A or channel B to operate as the
exclusive channel.
4. When you have made your selections, press the setup button to save
them and to exit setup, or press the Call A button to select other
functions to program.
If you do not press a button within five seconds, the beltpack exits the
setup program without making any changes.