Clear-Com RS-602 (No longer available) - Manual (Page 35)

3 3 R S - 6 0 2 / 6 2 2 B E L T P A C K
Audible Call Signal, Function 6
When this function is on, the beltpack produces an audible call signal
in the headset when a call signal is received.When this function is off, it
does not.
The audible call signal’s volume level is preset. (Volume may vary
slightly, depending on headset.) This function is useful for unspoken
cues when a visual call signal is not practical or effective.
To select an “audible call signal” for a channel:
1. Press and hold the setup button until the setup information window
displays a “P” and then release the button.
2. Repeatedly press the Call A button until “6” appears in the display.
3. Press the appropriate channel’s talk button (Talk A or Talk B) to
toggle “audible call signal” either on or off for that channel.
• A channel’s talk light reveals the function’s status for that channel.
If the talk light is on, “audible call signal” is on for that channel;
if the talk light is off, “audible call signal” is off for that channel.
• You can select “audible call signal” for one or both channels.
4. When you have made your selections, press the setup button to save
them and to exit setup, or press the Call A button to select other
functions to program.
If you do not press a button within five seconds, the beltpack exits the
setup program without making any changes.