Packaging, transport, storage – Burkert Type S039 User Manual

Page 8

spare parts

order code

sensor holder in pVdf
With PVDF paddle-wheel, FKM

seal, screws and certificate, for

DN06, DN08, and DN15 v2

559 602

With PVDF paddle-wheel, FKM

seal, screws and certificate, for

DN15 (except DN15 v2) to DN50.

444 657

set of o-rings (dn6 to dn50) for metal fittings
FKM

444 655

EPDM

444 656

Fig. 6: Position of O-ring in an S039 fitting

English

10. pAcKAGinG, TrAnSporT,

STorAGe

attention

damage due to transport
Transport may damage an insufficiently protected part.
• Transport the fitting in shock-resistant packaging and

away from humidity and dirt.

• Do not expose the fitting to temperatures that may

exceed the admissible storage temperature range.

poor storage can damage the fitting.
• Store the fitting in a dry place away from dust.
• Storage temperature: -15 to +100 °C.
damage to the environment caused by products
contaminated by fluids.
• Dispose of the fitting and its packaging in an environ-

mentally-friendly way.

• Keep to the existing provisions on the subject of waste

disposal and environmental protection.

English