Burkert Type 3003 - Manual (Page 5)

5
Intendeduse
3 inTenDeD use
non-authorized use of the electromotive rotary actuator type
3003 may be dangerous to people, nearby equipment and the
environment.
▶ The device may be used outside.
▶ During use observe the authorized data, the operating conditions
and conditions of use specified in the contract documents and
in the operating instructions. These are described in the chapter
entitled “Technical data”.
▶ The device may only be used in connection with third-party devices
and components recommended or approved by Bürkert.
▶ Requirements for safe and proper operation are proper trans-
port, storage and installation as well as careful operation and
maintenance.
▶ Only use the device as intended.
3.1 restrictions
Observe any existing restrictions that apply to the device to be exported.
4 General safeTy informaTion
This safety information does not cover:
• Haphazard situations that can arise during installation, operation and
maintenance of the use.
• Locally applicable safety regulations which the operator and instal-
lation personnel are obligated to follow.
hazard due to electrical voltage!
Intervention in the device poses an acute risk of injury.
▶ Before starting work, be sure to switch off the supply voltage and
secure it to prevent restarting.
▶ Always connect multiple electrical rotary open/closed
actuators with phase isolation via a switch.
▶ Observe all applicable accident protection and safety guidelines
for electrical equipment.
unintentional operation or impermissible damage can lead to
generally dangerous situations as well as physical injury!
▶ Take appropriate measures to prevent the possibility of uninten-
tional activation of the device!
the general rules of technology apply to the planning and
operation of the device!
▶ Observe the general rules of technology!
english
Type 3003