Burkert Type 8076 - Manual (Page 40)

40
Maintenance and troubleshooting
Type 8026- 8036- 8076
9. mAinTenAnce AnD
TroubleshooTinG
9.1. safety instructions
danger
risk of injury due to high pressure in the installation.
risk of injury due to electrical voltage.
risk of injury due to high temperatures of the fluid.
risk of injury due to the nature of the fluid.
Warning
risk of injury due to non-conforming maintenance.
• Maintenance must only be carried out by qualified and skilled
staff with the appropriate tools.
• Ensure that the restart of the installation is controlled after any
interventions.
→
To clean the device and the flow sensor, refer to the operating
manual available on the CD delivered with the device.
9.2. if you encounter problems
→
If you encounter problems, refer to the operating manual avai-
lable on the CD delivered with the device.
10. pAckAGinG, TrAnsporT
note
damage due to transport
Transport may damage an insufficiently protected device.
• Transport the device in shock-resistant packaging and away
from humidity and dirt.
• Do not expose the device to temperatures that may exceed the
admissible storage temperature range.
• Protect the electrical interfaces using protective plugs.
11. sTorAGe
note
poor storage can damage the device.
• Store the device in a dry place away from dust.
• Storing temperature for type 8026: -10 to +60°C.
• Storing temperature for type SE36: -10 to +60°C.
• Storing temperature for the fitting: refer to the related manual
English