Burkert Type 8076 - Manual (Page 21)

21
Installation and wiring
Type 8026- 8036- 8076
7.3.1. electrical connections
number of fixed
connectors type of connectors
1 male M12 fixed
connector female 5-pin M12 (available as an
accessory)
1 male M12 fixed con-
nector and 1 female M12
fixed connector female 5-pin M12 + male 5-pin M12
(both available as accessories)
7.3.2. Assembling the male or female
connector (accessories:
4 3 2 1
→
Unscrew the nut [1] on the body [4].
→
Insert the cable into the nut [1], the
cable clamp [2] and the seal [3], and
then into the body [4].
5,5
11,5
20
5,5
11
5
20
5
→
Strip 20 mm of the cable.
→
Cut the central wire (earth) so that
its length is equal to 11.5 mm.
→
Expose 5.5 mm of the wires on the
stripped cable.
→
Insert each wire into the appropriate
pin on the terminal block [5] (see
chap. „7.3.4“ to chap. „7.3.6“).
→
Tighten the terminal block [5] wired
to the body [4].
→
Tighten the connector nut [1].
Fig. 16: Multipin M12 connector (available as an accessory)
pin of the female m12 connector available
as an accessory (order code 438680) colour of the
wire
1 brown
2 white
3 blue
4 black
5 grey
English