Burkert Type 8076 - Manual (Page 35)

35
Adjustment and commissioning
Type 8026- 8036- 8076
8.8.2. choosing the units for the totalizers displayed in process level
The totalizers are saved if a power cut occurs.
Display Param Totalizers Total1 / Total 2 Unit Liter
m3
gal
Igal
This is
when the
device is be-
ing parame-
tered............
.................... This is
when the
device is be-
ing parame-
tered............
....................
8.8.3. Defining the connection mode of the outputs
HWMode Param Outputs sinkNPN
sourcePNP This is
when the
device is be-
ing parame-
tered............
.................... This is
when the
device is be-
ing parame-
tered............
....................
On a version of the device with an NPN transistor output and a current output, only the choice “sink/NPN” is possible.
The setting has no effect on a version with one fixed connector, 2 transistor outputs and a single current output, if the sole current
output is wired.
English