Burkert Type 8644 - Manual (Page 27)

8644/Rockwell - 23
S
YSTEM
D
ESCRIPTION
VALVE UNITS
Construction
Valve units are of modular construction and consist of:
• Basic electronic modules
• Basic pneumatic modules
• Valves
The digital outputs, on which the valves sit, are switched on the basic electronic module. Depending ont he
function, these switch the internal P channel to the service ports (outputs) of the pneumatic module.
Variants
The modular construction of the valve units permits of serveral variants.
NOTE You can obtain information about the correct assembly of modules, valves and accessories
via our Configurator. If you have any questions, please consult our Distribution Center.
* Width of basic electron/pneumatic
module = 33 mm, with 3 plug-on
positions for 10 mm valves 6524 / 6525
** Special version 3-fold, 10 mm valves
*** Available only for certain valve types
and with functional limitation.
See also the technical data of the valve
block and the description of the basic
pneumatic module.
Basic electronic module
Valves
Basic pneumatic module
Service ports
(outputs)
Modular construction of the valve units
ATTENTION!
Plugged-on valves may only be changed if the pressure in the AirLINE is relieved. If
a pressure shut-off is used, the valves may also be exchanged under pressure.
Types: pneumatic / electronic MP11/ ME02 MP12 / ME03
Add-on dimension 11 mm 16,5 mm
Valve types 6524
6525
0460 6526
6527
0461
No. of valve positions on
basic electronic module 2fold
----
8fold 2fold
3fold*
4fold
No. of valve positions on
basic pneumatic module 2fold
8fold 2fold
3fold*
4fold
Connection type
(on basic pneumatic module) D1/4"
D4
D6
M5
M7 D8
G1/8"
NPT 1/8"
D1/4"
D4
D6**
M5**
M7**
Non-return valve (optional) Without non-return valve
Non-return valve in R channel
Non-return valve in R+S channel
Pressure shut-off (optional) with pressure shut-off*** not available