Burkert Type 8644 - Manual (Page 10)

6 - 8644/Rockwell
G
ENERAL
N
OTES
WARRANTY CONDITIONS
This document contains no warranty statements. In this connection we refer to our general sales and
business conditions. A prerequisite for validity of the warranty is use of the device as intended with
observance of the specified conditions of use.
ATTENTION!
The warranty covers only faultless condition of the automation system and the
attached valves supplied. No liability will be accepted for consequential damage of any
kind that may arise from failure or malfunctioning of the device.
SCOPE OF DELIVERY
Immediately after receipt of the goods, make sure the contents are undamaged and agree with the scope of
delivery stated on the packing slip.
In case of irregularities, contact our customer service department at once:
Bürkert Fluid Control Systems
Service Department
Chr.-Bürkert-Str. 13-17
D-76453 Ingelfingen
Tel.: (07940) 10-111
Fax: (07940) 10-448
E-mail: [email protected]
Or to your Bürkert Sales Center
INFORMATION ON THE INTERNET
Operating instructions and data sheets for type 8644 may be found on the Internet under:
www.buerkert.com Germany Produkte Downloads Betriebsanleitungen Typ 8644 Rockwell
Furthermore, a complete documentation is available on CD. The complete Operating instructions may be
ordered under the following indentification number: 804 718
NOTE Technical data, configuration files and a detailed description of bus terminals and electrical
function terminals by the Rockwell company are available on the Internet web site:
www.ab.com Manuals On-Line I/O 1734 Point I/O
Bürkert has no influence upon the update status of the latter home page or on changes in
technical data or presentation on the pages linked thereto.
ASSEMBLY NOTE
If the configuration of the valve block also provides of Type 0461 (5/2- way pulsed valve, 5/3- way valve), a
profile rail EN 50022-35x15 must be used.
APPROVALS
The approval marks on Bürkert rating plates refer to the Bürkert products. In order that the complete valve
island is approved, a gateway with a design inspection certificate must be used. In this case, a valve
island may be extended with approved units having design inspection certificates up to 64 valves.
More detailed information on the approvals of the valves is to be found in the chapter Valves.