Burkert Type 8793 - Manual (Page 35)

35
Basicfunctions
7.3. Basic functions - setting parameter
7.3.1. ACTUATOR -
inputting the operating mode of the pneumatic actuator
Only for Types 8692 / 8693.
The operating mode of the pneumatic valve actuator used in combination with the positioner / process controller
can be input in this menu option.
The operating mode of the actuator has been preset at the factory.
CFA and CFB: single-acting
CFI: double-acting
The control function (CF) of the actuator can be found on the type label.
ACTUATOR Operating mode actuator single-acting
single-acting
double-acting
Figure 25: ACTUATOR function
7.3.2. INPUT -
enter the standard signal
→
Under this menu option, enter the standard signal used for the set-point value.
Factory setting: 4 – 20 mA
INPUT setpoint input 4 ... 20 mA
4 ... 20 mA
0 ... 20 mA
0 ... 10 V
0 ... 5 V
Figure 26: INPUT function
English
Software Tool - 8x92 / 8x93