Burkert Type 8793 - Manual (Page 21)

21
Operationandfunction
6.2.2. creating a project for Bürkert positioners
To be able to communicate with positioners and process controllers of types 8692, 8693, 8792 and 8793, first
select HART communication DTM and then a Bürkert device DTM:
1. To select a HART communication DTM and set parameter:
→
Select "HART Communication, Fa. Codewrights GmbH" from the device catalog and double click or drag and
drop to integrate it into the project.
Figure 13: To integrate a HART communication DTM:
→
Settings for the following parameters (mark communication DTM, then select the "Device / Parameter" menu
item with the menu bar or double click on the integrated communication DTM (COM1...n)):
Buerkert Werke GmbH
Figure 14: HART communication DTM - set parameters
English
Software Tool - 8x92 / 8x93