Burkert Type 8793 - Manual (Page 17)

17
Installation
Optional components such as the manual are not installed here.
If PACTware 2.4, PACTware 3.0 or PACTware 3.5 are already installed, all passwords can be transferred for
PACTware 3.6 at the end of the installation.
During the installation, a program group is entered in the Windows start menu for the current user and a link to
PACTware 3.6 appears on the desktop.
5.2.2. pactware version 4.1 and .net framework 2.0
Download and / or open the Zip file “PACTware 4.1 SP1 Buerkert.zip“ and unzip in a temporary directory. This zip
file contains all the necessary installation components.
Installation of PACTware requires the presence of software platform:
Microsoft .NET Framework 2.0
procedure to follow if “Microsoft .NET Framework 2.0“ is not present yet on the target computer:
→
Start setup
with a 64-bit operating system in directory dotNet\dotNET_20\x64
or with other operating systems in directory \dotNet\dotNET_20\x86.
procedure pactware Setup:
→
Start \PACTware\PACTware.msi.
Setup file contains:
• the basic setup for PACTware 4.1 with online help in various languages
• the HART communication DTM for PACTware 4.1
• the Generic HART DTM (not required)
After you have selected the installation language, the installation is performed.
At this point the HART communications DTM can also be installed. It is required because communication with
Bürkert devices runs via the HART protocol and the physical layer has an RS232 interface rather than a HART
interface.
Optional components such as the manual are not installed here.
If PACTware 2.4, PACTware 3.0, PACTware 3.5 or PACTware 3.6 are already installed, all passwords can be
transferred for PACTware 4.1 at the end of the installation.
During the installation, a program group is entered in the Windows start menu for the current user and a link to
PACTware 4.1 appears on the desktop.
English
Software Tool - 8x92 / 8x93