Burkert Type 8716 - Manual (Page 7)

7
Installation of the GSD file
inSTallaTiOn Of The gSD file 4.
The procedure is described by means of the Step7 software from Siemens and uses the valve terminal
8644 as an example.
When Step7 has started, as illustrated in
→
Figure 1: , go into the Hardware manager.
select
Figure 1: Hardware manager
Before the installation, close all open projects in the Hardware manager.
→
In the
→
“Options” menu→ select “Install GSD File” (see Figure 2: ).
select
Figure 2: Install GSD file
english
Type XXXX