Burkert Type 8716 - Manual (Page 10)

10
Configuration
Select Slave (eT200s) and function modules 5.2.
How the Slave and the function modules are selected is explained below.
The procedure which is described using the valve terminal 8644 as an example with cooperation partner
Siemens (ET200s) is almost identical for other versions.
Select Slave (ET200s) and pull onto the PROFIBUS using drag-and-drop (see
→
Figure 5: ).
ET200s
Figure 5: Select Slave
A selection of the available function modules can be found in the catalog branch of the Slave (see Figure 6: ).
english
Type XXXX