Burkert Type 6013 - Manual (Page 5)

5
Authorized use
2. AUTHORIZED USE
Unauthorized use of the device Type 6013 may be dangerous
to people, nearby equipment and the environment.
• The device is used exclusively as a solenoid valve for media per-
mitted according to data sheet and for use in Group II Category
2 G (zones 1 and 2), temperature class T5 or T6 or 2 D (zones
21 and 22), temperature 80 °C (see specifications on the
approval plate).
• The device may be used only for the applications designated in
chapter „5. Application conditions of the devices“ and in conjunc-
tion with third-party devices and components recommended and
authorized by Bürkert.
• The applied protection class is the intrinsic safety (Ex ia) for coils
with cable connection or connection via flat plug by means of
device socket.
• The faultless and reliable operation of the system assumes cor-
rect transportation, correct storage and installation as well as
careful operation and maintenance. Any other use is regarded as
unauthorized. Bürkert is not liable for any resulting damage. The
user alone bears the risk.
• Only use the device for its intended purpose.
2.1. Restrictions
If exporting the system/device, observe any existing restrictions.
2.2. Ex approval
The Ex approval is only valid if the modules and components authorized
by Bürkert are used as described in these operating instructions.
Type 6013 may be used only in combination with the additional com-
ponents released by Bürkert, otherwise the Ex approval will be voided!
If any unauthorized changes are made to the device, modules or com-
ponents, the Ex approval will also be voided.
english
PTB 01 ATEX 2101