Burkert Type 2712 - Manual (Page 11)

C
OMMISSIONING
2712 - 9
english
The control valve is driven by compressed air via the TopControl .
➔ Remove the protective caps from the ports.
➔ Connect the air supply to port 1
The supply pressure required for complete opening or closing of the valve may lie between the minimum
values of 3 to 6 bar, depending on the drive unit. The permissible maximum value for the control pressure
is 7 bar. The value for the supply pressure is given as P
pilot
on the rating plate of the respective valve.
➔ Mount the exhaust air pipe or noise reducer on port 3
Control medium: instrument air, class 3 according to DIN ISO 8573-1
Pneumatic installation
Fluidic connections of the Top Control Continuous
Outlet air
connector
(inscription: 3)
Supply pressure connector
(inscription: 1)