Burkert Type 2658 - Manual (Page 19)

19
Installation
Fastening nut (nut 1 of 4) Fig. 10:
installation in the pipeline 7.4.
DANGER!
danger - high pressure in the equipment!
There is a serious risk of injury when reaching into the equipment.
Before loosening the lines and valves, turn off the pressure and •
vent the lines.
Close the fittings slowly to avoid pressure surges.
•
a damaged fitting may result in discharge of medium!
Extreme temperature fluctuations may cause tensions between •
pipeline and fitting.
If the pipelines cannot counterbalance these fluctuations, the
•
fitting may be damaged.
Attach pipelines in such a way that any tensions can be
•
counterbalanced.
WARNING!
danger when using aggressive media!
Leaking medium may cause injuries.
Ensure that the pipes have been connected correctly. •
Regularly check that the plastic ball valve is not leaking. •
Wear protective clothing. •
english
Type 2657