Basic safety instructions, Chapters entitled “basic safety instructions” and – Burkert Type 2101 User Manual
Page 5

5
Basic safety instructions
Type 2101
4. basic safeTy insTrucTions
These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation,
operation and maintenance of the devices.
• local safety regulations, whereby the operator is responsible for their
compliance, by the installation personnel too.
Danger!
risk of injury from high pressure in the equipment/device!
• Before working on equipment or device, switch off the pressure
and deaerate/drain lines.
risk of injury due to electrical shock!
• Before reaching into the device, switch off the power supply and
secure to prevent reactivation!
• Observe applicable accident prevention and safety regulations
for electrical equipment!
risk of burns!
The surface of the device may become hot during long-term
operation.
• Do not touch the device with bare hands.
risk of injury from moving parts in the device!
• Do not reach into openings.
risk of injury caused by the spring jumping out when the
actuator is opened.
• The actuator must not be opened.
risk of injury caused by the lines and device rupturing.
• Due to the risk of water hammer, valves with a flow direction
above the seat must not be used for liquid media.
• Consider the type of flow direction and the type of medium for
operation of the device.
General hazardous situations.
To prevent injury, ensure:
• In the potentially explosion-risk area the globe valve type 2101 may
be used only according to the specification on the separate Ex type
label. For use observe the additional information enclosed with the
device together with safety instructions for the explosion-risk area.
• Devices without a separate Ex type label may not be used in a
potentially explosive area.
• Secure system/equipment from unintentional activation.
• Only trained technicians may perform installation and maintenance
work.
• After an interruption in the power supply or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
• The device may be operated only when in perfect condition and
in consideration of the operating instructions.
• The general rules of technology apply to application planning and
operation of the device.
english