Maintenance work, Removal, Packaging, transport, storage – Burkert Type 2101 User Manual
Page 15
15
Removal
Type 2101
Warning!
seat leaks caused by the minimum pilot pressure being too
low (on cfb and cfi) or the medium pressure being too high!
• Observe the minimum control pressure and medium pressure
9. mainTenance Work
→
Complete a visual inspection of the equipment once a year. Shorter
maintenance intervals may be recommended depending on the
operating conditions.
9.1. replacement parts
Caution!
risk of injury and/or damage by the use of incorrect parts!
Incorrect accessories and unsuitable replacement parts may
cause injuries and damage the device and the surrounding area.
• Use only original accessories and original replacement parts
from Bürkert.
wearing parts: Seals and the swivel plate.
→
In the event of a leak, replace the relevant wear part.
The maintenance and repair instructions are available on the
10. removal
Danger!
risk of injury from discharge of medium and pressure!
It is dangerous to remove a device which is under pressure due to
the sudden release of pressure or discharge of medium.
• Before removing a device, switch off the pressure and vent the lines.
procedure:
→
Loosen the pneumatic connection.
→
Remove the device.
11. PackaGinG, TransPorT,
sToraGe
note!
transport and storage damage!
• Protect the device against moisture and dirt in shock-resistant
packaging during transportation and storage.
• Permitted storage temperature: -20 – +65°C.
damage to the environment caused by device components
contaminated with media.
• Ensure the device and packaging are disposed of in an environ-
mentally sound manner.
• Observe applicable regulations on disposal and the
environment.
english