Burkert Type 2033 - Manual (Page 28)

28
Option: Electrical position repeater
10.3.2. Installation and commissioning
→
Screw adapter ② instead of transparent cap onto actuator
(see “ Fig. 16: Actuators K-175, L-225 with electrical position
repeater”).
→
Screw electrical position repeater ① into adapter ②
(see ” Fig. 16: Actuators K-175, L-225 with electrical position
repeater”).
Electrical connection
(see “
Fig. 17: Connection of the appliance socket”)
Pos. Designation of parts
1
Flange sealing
2 Contact insert
3 Cap screw
4 Cap
5 Pressure ring
6 Flat seal
7 Collet
8 Coupling nut
Fig. 17: Connection of the appliance socket
→
Loosen cap screw ③ on the appliance socket and remove.
NOTE!
Functional failure due to buckled connector lugs preventing
re-installation of the contact insert!
• Carefully remove the contact insert and take care to ensure that
the connector lugs do not become buckled.
→
Loosen screw in the cap ④ and remove contact insert ②.
→
Lead cable through coupling nut ⑧.
→
Make connection as per circuit diagram
(see „
Fig. 18: Electrical WAFitsching“).
→
Max. rating:
5 A at 250 V AC
0,25 A at 250 V DC.
Assignment: 1. Input
2. Break contact
3. Make contact
Fig. 18: Electrical WAFitsching
→
Place contact insert ② in the cap ④ and screw on.
→
Screw on appliance socket with cap screw ③, assuring proper
seating of the flat seal ⑥.
→
Test valve for function and leaktightness.
english
Type 2000, 2002, 2012
2030, 2031; 2032, 2033