Burkert Type 0742 - Manual (Page 5)

5
Authorized use
2. AuThOrizEd usE
unauthorized use of the device type 0742 may be dangerous
to people, nearby equipment and the environment.
• The device is used is used exclusively as a solenoid valve for media
permitted according to the data sheet and for use in Explosion group
II, Category 2G and Temperature class T4 (T3 at +55 °C) or T5
(see specifications on the approval plate).
• The device may be used only for the applications designated in
chapter "5. Application conditions of the devices" and in con-
junction with third-party devices and components recommended
and authorized by Bürkert. Use according to the authorized data,
service and operating conditions specified in the contract docu-
ments and operating instructions.
• The applied protection class is encapsulation EX "m" for coils with
cable connection or encapsulation with increased safety EX "em"
for coils with terminal box.
• The faultless and reliable operation of the system assumes cor-
rect transportation, correct storage and installation as well as
careful operation and maintenance. Any other use is regarded as
unauthorized. Bürkert is not liable for any resulting damage. The
user alone bears the risk.
• Only use the device for its intended purpose.
2.1. restrictions
If exporting the system/device, observe any existing restrictions.
2.2. EX approval
The EX approval is only valid if the modules and components autho-
rized by Bürkert are used as described in these operating instructions.
Type 0742 may be used only in combination with the additional com-
ponents released by Bürkert, otherwise the EX approval will be voided!
If any unauthorized changes are made to the device, modules or com-
ponents, the EX approval will also be voided.
Temperature classes and electrical data see chapter
"6. Technical Data".
english
PTB 02 ATEX 2173 X