First start-up – Alliance Laundry Systems PHM1397C User Manual

Page 48

First Start-Up

F8112101

First Start-Up

IMPORTANT: The following safety checks are to
be performed BEFORE initial start-up.

1. Make sure all electrical and plumbing

connections have been made in accordance with
applicable codes and regulations.

2. Make sure machine is electrically grounded. This

is a high leakage current device! Improper
grounding can cause electrical shock hazards and
EMI problems.

3. Make sure all service connections (water, drain,

electrical, steam, etc.) to equipment are flexible
and are of correct size, length and type. Make
sure there are no kinks and that all clamps and
attachment points are secure.

4. Make sure all transport brackets have been

removed (where applicable).

5. Make sure machine is properly grouted to floor

and leveled. Always allow plenty of time for
grout to harden before tightening anchor bolts
and running machine.

6. Make sure anchor bolts have been tightened

properly.

IMPORTANT: The following safety checks are to
be performed DURING the initial start-up.

1. Verify door lock system works properly

(whenever machine is in operation, loading door
must be in the closed position and locked). Do
this by attempting to unlock and open loading
door while machine is in operation. If necessary,
call a qualified technician.

2. Verify machine cannot operate with loading door

open. Do this by attempting to start a program
while loading door is open. If necessary, call a
qualified technician.

3. Verify machine does not move or vibrate

excessively. Do this by loading machine with a
small load of laundry (about half capacity) and
running a program with a high-speed extract. The
machine should be reasonably quiet and still
during the extract.