Burkert Type 0450 - Manual (Page 11)

8640-0450 - 9
T
ECHNICAL
D
ATA
english
Pilot valve Type 6106:
• Read the voltage, power rating and type of protection and current
from the nameplate!
• Voltage tolerance: ±10 %
• Use 10 mm filter to assure a long service life of the pilot valve!
• Electrical connection: cable connector Type 2506 onto the plug
connector of the coil (fixing torque: 0.4 Nm)
• Protection Type IP65 (only in connection with cable connector Type
2506).
• The cable connector may be mounted turned by 180° to suit the cable
direction.
The coil heats up in operation!
Observe the voltage: with AC be sure to
use the cable connector Type 2506 or
connect a rectifier between!
On screwing the cable connector to the
coil, make sure the flat seal is properly
seated!
ATTENTION!
NOTE
Electrical connection
10 µm
Example
Alwys connect the
protective conductor!
0,4 Nm
Type 2506
flat seal