Brooks Instrument 4800 Series - Manual (Page 11)

1-5
Brooks ® 4800 Series
Section 1 Introduction Installation and Operation Manual
X-TMF-4800-MFC-eng
Part Number: 541B072AAG
September, 2013
EMC Directive 2004/108/EC:
Per EN 61326:2006
Hazardous Location Classification
The modules shall be installed in a suitable enclosure providing a degree of
protection of at least IP54 according to EN 60529, taking into account the
environmental conditions under which the equipment will be used.
Provisions shall be made to prevent the rated voltage from being exceeded
by transient disturbances of more than 40 %.
Enclosure: Type 1/IP40
Ambient Temperature: 0°C > Tamb < 50°C (32°F > Tamb < 122°F)
United States and Canada
Non-Incendive,
Class 1, Division 2
Groups A, B, C & D; T4
150464
Per UL 1604 and CSA-C22.2 no. 213-m87
Class 1, Zone 2, AEx nA II T4
ANSI/UL 60079-15
Ex nA II T4
Per CSA-E60079-15.02
CSA C22.2 No. 60529-05
Europe - ATEX Directive 94/9/EC
KEMA 06ATEX 0251X EN 60079-0:2006 EN 60079-15:2005
Pressure Equipment Directive (97/23/EC):
Sound Engineering practice.
Certifications:
These certifications cover the 4800 Series mass flow devices as well as
the local operator interface (LOI).