EXP Computer HD Traveler E - Manual (Page 7)

- 5 -
SOFTWARE INSTALLATION
1. Boot-up your computer in Windows 98 and make sure the USB port
device driver is installed and available in Windows 98.
2. Plug the port connector on the USB cable into the USB port on the
computer.
3. If this is the very first time you are plugging the portable hard disk into
the USB port of computer, the “Add New Hardware Wizard” dialog
box will appear as shown below.
4. Click Next, check the “Search for the best driver for your device”,
and click Next again.
USB port(s) on PC Port connector on the USB cable