EXP Computer HD Traveler E - Manual (Page 17)

- 15 -
SOFTWARE INSTALLATION FOR DOS/WINDOWS 3.1
Automatic Installation
The device driver installation program provides a simple INSTALL
program to help you install the device driver into the computer with ease.
Please follow the instructions below to proceed automatic installation.
1. Insert the device driver diskette into a floppy disk drive on your
computer.
2. Change the working directory to the floppy drive containing the device
driver diskette by typing “A: ” then press ENTER.
3. At the DOS prompt A:\>, type “INSTALL” followed by the ENTER
key.
4. Choose a configuration
5. Press ENTER or click on the OK button to continue. When the
opening screen appears, a dialog box will be displayed for you to type
in the directory to place the device driver and to select the I/O ports
used for PCMCIA interface card.
6. Type in the directory you select to install the driver and press the TAB
key to move to next field to set the I/O port. The default setting of the
I/O address is 320-32F. After completing this selection, click on the
Install button to continue.
7. The rest of the installation should proceed automatically, and the
CONFIG.SYS files on your computer will be updated automatically.
8. Reboot your computer and the PCMCIA Portable Hard Disk will be
enabled automatically.