EXP Computer HD Traveler E - Manual (Page 6)

- 4 -
HARDWARE INSTALLATION
NOTE: Use the AC adapter included with this unit ONLY. Using the
incorrect AC adapter will result in permanent and
unpredictable damage to the USB/PCMCIA Portable Hard
Disk.
1. Connect the 36-pin connector from the USB cable to the interface
connector on Portable Hard Disk. Press firmly until the connector is
seated.
2. Connect the AC adapter into the DC IN jack at the rear panel of the
Portable Hard Disk.
3. Make sure the Power Source Switch is at the DC position.
4. Attach the AC adapter to the AC power outlet.
5. Follow the Software Installation for the next steps.
Push
Push
Switch to DC position