EXP Computer HD Traveler E - Manual (Page 12)

- 10 -
HARDWARE INSTALLATION
1. Connect the 36-pin connector on PCMCIA interface card to the
Interface Connector of Portable Hard Disk. Press firmly until the
connector is seated.
2. Make sure the Power Source Switch is at the PC position.
3. Place the portable hard disk in the recommended horizontal position.
4. Locate the PCMCIA socket of your computer or consult your
computer’s user’s manual for its location.
5. Align the PCMCIA interface card with the arrow sign pointing toward
the computer’s socket. (Please note that the PCMCIA interface card is
keyed to guide for proper insertion.)
6. Slowly insert the PCMCIA interface
card into the socket and press firmly
until the connector is seated.
7. Please follow the Software
Installation procedures to install the
PCMCIA Portable Hard Disk device driver.
CAUTION
You should connect the connector of the PCMCIA interface card to the
Portable Hard Disk before inserting the PCMCIA interface card into your
computer. DO NOT connect/disconnect the Portable Hard Disk to/from the
PCMCIA interface card when the card is in the PCMCIA socket.