A&D Super Wash Down Scales SW-150KL - Manual (Page 25)

23
12.3. Function list
Item Parameter Description
Š 0 Auto power-off disabled Auto power-off function
poff 1 Auto power-off enabled
Turns the power OFF
automatically
0 Normal (1/3,000)
Š 1 High (1/6,000 or 1/7,500)
Weight display
resolution
re5o 2 Maximum (1/12,000 or 1/15,0 00)
Changes the
minimum display
Š 0 kg Weighing unit
Ut-g 1 g
0 Zero tracking function disabled Zero tracking
trc Š 1 Zero tracking function enabled
Tracks the zero drift
Š 0 ±0.5d (width 1d)
1 ±1.0d (width 2d)
Stability band
width
5t-b 2 ±2.0d (width 4d)
0 0.5 second
Š 1 1.0 second
Stability
detection time
5t-t 2 2.0 seconds
Conditions to turn the
STABLE indicator on
d = minimum display
in kg
0 Weak stability / fast response
Š 1 Normal stability / normal response
Stability
Response speed
Cond 2 Strong stability / slow response
Filtering
Š 0 2400 bps
1 4800 bps
Serial interface
baud rate
bp5 2 9600 bps
Š 0 7 bits / EVEN
1 7 bits / ODD
Serial interface
data bits / parity
btpr 2 8 bits / Non parity
Š 0 Stream mode / Command mode
1 Command mode only
2 Print switch mode / Command mode
3 Auto-print mode +/- data / Command mode
Serial interface
Data output
mode
prt
4 Auto-print mode + data/ Command mode
Š 0 RS-232C
1 RS-422
Serial interface
Type
5if 2 RS-485
Serial interface
Address
adr
##
## = 00 to 99
(Factory setting: ## = 01)
0 No reply except data to commands
Serial interface
Response
aCk
Š 1 Reply to commands
Only when the
options, RS-232C or
RS-422/485, are
used.
Š 0 Five-level (LOLO, LO, OK, HI, HIHI) Comparator mode
Cp-l 1 Three-level (LO, OK, HI)