A&D Super Wash Down Scales SW-150KL - Manual (Page 19)

17
Three-level comparator mode
Results Comparison formula LED display
LO
Displayed value < LO limit value
(Or over in the negative value) ( Red LED on)
OK LO limit value ≤ Displayed value ≤ HI limit value
( Green LED on)）
HI
HI limit value < Displayed value
(Or over in the positive value) ( Red LED on)
LO limit value = Lower limit value
HI limit value = Upper limit value
‰
The comparator values are common to the weighing and counting mode.
‰ Ignore the decimal point when setting the comparator values.
For example, when the weighing capacity is 6 kg and the setting value is “001000”:
Display mode Limit value Capacity / Minimum display
Normal resolution kg 1.000 kg 6.000 kg / 0.002 kg
High resolution kg 1.000 kg 6.000 kg / 0.001 kg
Maximum resolution kg 0.1000 kg 6.0000 kg / 0.0005 kg
Normal resolution oz 100.0 oz 210.0 oz / 0.1 oz
High resolution oz 10.00 oz 210.00 oz / 0.05 oz
Maximum resolution oz 10.00 oz 210.00 oz / 0.02 oz
Counting mode 1000 pcs
‰ The comparator values are maintained even if the power is turned OFF.
‰ Judgment order of comparison is from the top row to the bottom in the comparator
mode tables
‰ In this mode, the entered comparator values are not judged. Even if the upper limit
value is less than the lower limit value, no error will be output.