EXP Computer CD Traveler Series CD-620, CD-820, CD-1020, and CD-2020 with Portable CD-ROM card - Manual (Page 28)

- - 26
2) Choose the Drivers icon from Control Panel, and choose the Add button to set
up the driver [MCI] CD Audio.
3) Start the Media Player.
4) Select Device CD Audio from the menu bar.
5) Click the play button on the screen to start it.
6) Connect headphones set to the Headphone Jack
1) If your computer is equipped with a sound card, you can also connect the LINE-
OUT jack of your CD-ROM to the LINE-IN jack of the sound card with a 3.5
mm audio cable. This will result in a better audio output from the speakers of the
sound card.
The PLAY/PAUSE, NEXT/PREVIOUS buttons will still work in CD-ROM mode.
However, these buttons should be used in audio CD playing mode ONLY. Use these
buttons other than playing audio CD will cause error. Also, do use these buttons
along with a CD audio software utilities. Otherwise, incorrect information may be
reported by the CD audio software.
Figure 19