EXP Computer CD Traveler Series CD-620, CD-820, CD-1020, and CD-2020 with Portable CD-ROM card User Manual

Page 16

Text mode
Original mode

- -

SOFTWARE INSTALLATION FOR WINDOWS NT 4.0

There are different ways to install the Windows NT drivers for CD-

ROM. The way describe here is the best way we have found the drivers will
work with most computers.

Install the CD-ROM under Windows NT 4.0

This procedure will install CD-ROM drive as additional storage device. Shutdown
the system, turn the power switch off. Insert the CD-ROM PC into the slot then
restart the computer. Once the system comes up Go to Start, Setting, and Control
Panel.

Figure 12

Double click on SCSI Adapters, Click on Driver tab and Add
button.