EXP Computer CD Traveler Series CD-620, CD-820, CD-1020, and CD-2020 with Portable CD-ROM card - Manual (Page 12)

- - 10
SOFTWARE INSTALLATION
SOFTWARE INSTALLATION FOR WINDOWS 95
DO NOT RUN “INSTALL” FROM THE DRIVER DISKETTE.
If your computer does not have Windows 95 installed yet, please refer to the section
titled “Using PCMCIA CD-ROM to Install Windows 95”.
Use the PCMCIA CD-ROM with Windows 95
Due to the Plug-N-Play feature in Windows 95. The following dialog box will appear
when the PCMCIA CD-ROM is inserted into the PCMCIA slot for the very first
time.
If the dialog box does not appear and the CD-ROM folder can not be found in My
Computer, please refer to the section titled “Enabling 32-Bit Card Support”.
Select “Driver from disk provided by hardware manufacturer” and click on OK
button, Windows 95 will then prompt you to insert the manufacturer’s installation
disk. Insert the PCMCIA CD-ROM device driver disk into your floppy drive.
Specify the directory as A:\ (or B:\ whichever containing the diskette) and select OK.
Figure 8