Asus Barebone System Vintage-PE2 User Manual

Page 90

5 - 2 8

C h a p t e r 5 : B I O S s e t u p

CPU Fan Speed [xxxxRPM] or [N/A]

The onboard hardware monitor automatically detects and displays the CPU
fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A.

CPU Q-Fan Control [Enabled]

Allows you to enable or disable the ASUS Q-Fan feature that smartly
adjusts the fan speeds for more efficient system operation.
Configuration options: [Disabled] [Enabled]

When the C P U Q - F a n C o n t r o l

C P U Q - F a n C o n t r o l

C P U Q - F a n C o n t r o l is set to [Enabled], the C P U F a n

C P U F a n

R a t i o

R a t i o and C P U T a r g e t T e m p e r a t u r e

C P U T a r g e t T e m p e r a t u r e

C P U T a r g e t T e m p e r a t u r e items appear to allow

selection of the appropriate fan speed ratio.

CPU Fan Ratio [Auto]

Allows you to select the appropriate CPU fan speed ratio for the system.
The default [Auto] automatically selects the fan speed ratio when
operating a low CPU temperature. Select a higher ratio if you installed
additional devices and the system requires more ventilation.
Configuration options: [Auto] [90%] [80%] [70%] [60%]

CPU Target Temperature [xxxºC]

Allows you to set the CPU temperature threshold when the CPU fan speed
is increased to lower the CPU temperature. Configuration options: [Auto]
[53ºC] [56ºC] [59ºC] [62ºC] [65ºC] [68ºC] [71ºC] [74ºC] [77ºC] [80ºC]
[83ºC]

Chassis Fan Speed [xxxxRPM] or [N/A]

The onboard hardware monitor automatically detects and displays the
chassis fan speed in rotations per minute (RPM). If the fan is not connected
to the chassis, the specific field shows N/A.

VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage

The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.

This manual is related to the following products:

Vintage-PE2