Asus Barebone System Vintage-PE2 User Manual

Page 84

5 - 2 2

C h a p t e r 5 : B I O S s e t u p

5.4.4

Onboard Devices Configuration

Configure Win627EHF Super IO Chipset

Onboard AC97 Controller

[Enabled]

Onboard LAN

[Enabled]

Onboard LAN Boot ROM

[Disabled]

Parallel Port Address

[378]

Parallel Port Mode

[ECP]

ECP Mode DMA Channel

[DMA3]

Parallel Port IRQ

[IRQ7]

Onboard AC97 Controller [Enabled]

Enables or disables the onboard AC97 controller.
Configuration options: [Enabled] [Disabled]

OnBoard LAN [Enabled]

Enables or disables the onboard LAN controller.
Configuration options: [Disabled] [Enabled]

Onboard LAN Boot ROM [Disabled]
Allows you to enable or disable the LAN Boot ROM in the onboard LAN
controller. Configuration options: [Disabled] [Enabled]

Parallel Port Address [378]

Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]

Enable or disable
Azalia controller.

Pre-allocated Graphics Memory [Enabled, 8MB]

Allows user to select the amount of system memory pre-allocated by the
internal graphics device. Configuration options: [Enabled, 1MB]
[Enabled, 8MB]

Graphics Memory Type [Auto]
Selects the size of graphic memory.
Configuration options: [Auto] [DVMT] [FIX] [DVMT+FIX]

This manual is related to the following products:

Vintage-PE2