Asus Barebone System Vintage-PE2 User Manual

Page 78

5 - 1 6

C h a p t e r 5 : B I O S s e t u p

PIO Mode [Auto]

Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]

DMA Mode [Auto]

Selects the DMA mode. Configuration options: [Auto] [SWDMA0]
[SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0]
[UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Disabled]

Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]

5.3.5

IDE Configuration

The items in this menu allow you to set or change the configurations for
the IDE devices installed in the system. Select an item then press
if you want to configure the item.

IDE Configuration

Onboard IDE Operate Mode

[Enhanced Mode]

Enhanced Mode Support On

[SATA mode]

IDE Detect Time Out (Sec)

[35]

Onboard IDE Operate Mode [Enhanced Mode]

Allows selection of the IDE operation mode depending on the operating
system (OS) that you installed. Set to Enhanced Mode if you are using
native OS, such as Windows

2000/XP.

Configuration options: [Disabled] [Compatible Mode] [Enhanced Mode]

Set to [Compatible
Mode] when Legacy OS
(i.e. WIN ME, 98,
NT4.0, MS DOS is
used.

Set to [Enhanced Mode
when Native OS) i.e.
WIN 2000, WIN XP) is
used.

This manual is related to the following products:

Vintage-PE2