Analog Way Smart Vu LE - Manual (Page 31)

To configure audio settings of the Smart Vu LE , plug all audio inputs into the device, and navigate to the
Audio menu.
1/ Choose the audio mode, Break Away or Top Layer Follow, which you wish the audio to work in.
* NOTE * : the Break Away mode will air the selected audio source, while the Top Layer Follow mode will air
audio from the toptmost active layer of the Smart Vu LE.
2/ Select Source Settings from the Audio menu to select the audio source you wish to work with, then set
levels and left/right balance for each input.
3/ Select Auxiliary Settings to determine level and balance of the auxilary input.
4/ Select the Main Output menu to determine main audio output level, balance and delay settings, or to mute
main audio output.
5/ Select Delay Mode, to determine how the Smart Vu LE deals with audio delay. Select Auto Adjust to let the
Smart Vu LE determine audio output delay. Select Manual Adjust to determine audio delay manualy.
*NOTE* : selecting Manual Adjust will give access to audio delay value (in milliseconds) of the main audio
output menus.
Audio configuration
30