Analog Way Smart Vu LE - Manual (Page 24)

The STANDBY button allows users to put the Smart Vu LE into sleep
mode, and startup again. The STANDBY button does not replace
the ON/OFF switch at the rear of the unit, and is implemented
essentially for ease of use in rackmount situations.
The Menu Screen of the Smart Vu LE is the visual interface to your Smart Vu LE menu. It gives users a
constant indication of available menu options, parameters of any selected object, system information, and
everything you need to know to control the device.
The Menu scroll knob allows users to quickly scroll through menu items and increase or decrease any
modifiable value in the Smart Vu LE menu. Simply scroll to the desired menu item, and press the ENTER
button to confirm your choice.
The EXIT/MENU button and the ENTER button in the Control section of the
Smart Vu LE , allow users to
respectively enter and exit the SmartVu menu, and confirm selected menu items.
The Input Selection section allows to select which input (1-7) to display in a selected layer. Select one of
7 simultaneous inputs, (4 analog inputs, 1 DVI-D input, 2 SDI inputs) by simply pressing one of the Input
buttons.
When pressed, the BLACK button allows users to remove layer content on screen.
Standby button
Menu section
Cut button
Input selection section
The Cut button of the Smart Vu LE is a front panel shortcut to the Layer menu, where it is then
possible to set transition settings for the chosen source.
23