Delta Controls DPT-2000 - Manual (Page 13)

11 IOM-DPT-A: FEB 2014
INTRODUCTION
1.1. This Manual is intended for users of DPT-2000ALW smart temperature transmitters in normal and
intrinsic-safety versions, containing the data and guidelines necessary to understand the functioning of the
transmitters and how to operate them. It includes essential recommendations concerning installation and use,
as well as emergency procedures.
Parameters and information given in the remaining part of the manual regard simultaneously all the
transmitters, their intrinsically safe versions and version with various types of casings.
1.2. Additional data on DPT-2000ALW transmitters in Ex versions is contained in the appendix
designed to DTR.DPT.ALW.03 Appendix Exi. During installation and use of the transmitters in Exi
version reference should be made to DTR.DPT.ALW.03 in conjunction with Appendix Exi.
1.3. Additional data on DPT-2000ALW transmitters in Exd versions is contained in the appendix
designed to DTR.ADPT.ALW.03 Appendix Exd.01. During installation and use of the transmitters in
Exd version reference should be made to DTR.DPT.ALW.03 in conjunction with Appendix Exd.01
2. USER MATERIALS
Transmitters are delivered in single and/or multiple packs.
Together with the transmitter are delivered:
a. Product certificate, which is also as the warranty card
b. Declaration of conformity - on request,
c. Copy of ATEX certificate – on request
d.
User’s Manual numbered „DTR.DPT.ALW.03”.
Items b), c), d) are available at : www.delta-controls.com
3. APPLICATIONS AND MAIN FEATURES
3.1. The DPT-2000ALW smart temperature transmitters are designed to measure temperature in various
branches of industry in normal conditions as well as in conditions of danger the explosion of gas and dust.
3.2. The DPT-2000ALW transmitters may be equipped with various types of measuring insert casings
which allows for their application in various conditions.
3.3. The DPT-2000ALW transmitters characterized by:
a. Two-wire power supply (4…20mA current loop),
b. Digital signal processing (filtration, linearization, compensation),
c. Possibility of local configuration from display panel or remotely (HART protocol).
d. Autodiagnostic system
e. Ambient temperature effect compensation
f. Input/output galvanic separation.
4. IDENTIFYING MARKS. ORDERING PROCEDURE
4.1. Identifying marks
Every transmitter carries a rating plate containing at least the following information:
a. manufacturer name
b. CE mark
c. transmitter type: DPT-2000ALW
d. basic range
e. set range
f. power supply voltage
g. output signal
h. year of manufacture and serial number
i