CEMB USA C72_2SE EVO (B) - Manual (Page 6)

6
2 1
4
3
5
6
1842
1475 1324
1318
Use and maintenance manual Rev. 12-2009
ENGLISH
Technological description
2.1 PURPOSE
C72/2 EVO C72SE/2 EVO is used to balance the wheels
of cars, vans, 4-WD, motorcycles and scooters weighing
less than 75 Kg. It can be operated in the temperature
range of 0° to + 45°C.
The machine can oper ate only on fl at non resilient fl oor.
To lift the machine, lever only on the base where the 3
support points are located. never, under any circustance,
apply force to other points such as the spindle, head, or
accessory shelf. It functions properly without having to
fasten it to the floor with wheels weighing up to 35 kg; for
heavier wheels, fasten it at the points indicated.
Thanks to the new and exclusive VDD (Virtual Direct Drive)
system, reliable unbalance measurements can be made
in a short time, almost half the time of the cycle used with
respect to other balancers in this range.
The main features include:
machine settings menu. ▪
optimisation of tyre and rim unbalance. ▪
static programme, ▪ ALUS; SPLIT ; Unbalance optimization;
Double operator; Self diagnostics; Self calibration.
automatic minimisation of static unbalance
▪
wheel locking; gauge locking (only SE) ▪
automatic width (option) ▪
eccentricity measurement (option) ▪
2.2 TECHNICAL SPECIFICATIONS
The following data refers to the balancer in its standard
configuration.
Single-phase power supply 115 / 230 V 50/60 Hz
Protection class IP 54
Max.power consumption 0,65 Kw
Balancing speed 100 min -1
Cycle time for wheel 4.7 sec. (5 3/4”x14”) 15 Kg.
Max.resolution of measurement 1 gram
Position resolution ± 1.4 °
Average noise < 70 dB (A)
Rim-machine distance 0 - 255 mm
Rim width setting range 1.5” ÷ 20” or 40 ÷ 510 mm
Diameter setting range 10” ÷ 30” or 265 ÷ 765 mm
Min/max. compressed air pressure 8 ÷ 10 Kg/cm 2
approx. 0.8 to 1 Mpa;
approx. 8 to 10 BAR;
approx. 115 to 145 PSI.
Air consumption for wheel lock/release 4 lt. (8 Kg./cm 2 )
2.3 DIMENSIONS AND WEIGHTS
The machine weighs 130 kg.
2. Technological description
CONTROL PANEL 1.
WEIGHT-TOOL HOLDER 2.
LOCK NUT 3.
AUTOMATIC GAUGE 4.
COLLAR (VERS. SE) 5.
BRAKE/BP PEDAL 6.