CEMB USA C72_2SE EVO (B) - Manual (Page 13)

13
1 2
1
2
1
2
1
2
1
2
Use and maintenance manual Rev. 12-2009
ENGLISH
► Outside
To cancel the function, press the button again
close the guard and press the button to start a new
spin.
5.4 SPLIT FUNCTION
(unbalance resolution)
The SPLIT function is used to position the adhesive weights
behind the wheel spokes (angle > 18°) so that they are no
longer visible (for alloy rims). Use this function in the ALU
or STATIC mode where the adhesive weight is applied to
the outer side of the rim.
Enter the wheel dimensions in the ALU S mode and press
START.
Turn the wheel to the outer side unbalance correction a.
position.
Mo b. ve one of the spokes to 12 o’clock (e.g.: 1) and
press
Following c. the direction of rotation indicated by the
position LED’s, move spoke 2 to12 o’clock and press
.
The value to use for correction in position 2 is dis-
played.
Mov d. e spoke 1 to the correction position as indicated
by the position LED’s
To return to the normal unbalance indication press any
button.
INFORMATION
The spoke-to-spoke distance must be a minimum of 18°
and a maximum of 120° (if not, errors 24, 25 or 26 ap-
pear). Spokes with irregular or inconstant angles can be
compensated.
5.5 DOUBLE OPERATOR PROGRAM
This program allows memorizing the dimensions of two types
of wheels. Thus two operators can work simultaneously on two
differents cars using the same balancing machine. The system
memorizes two programs with various present dimensions.
Press 1. to select the operator (1 or 2).
Enter the dimensions (see 2.
WHEEL DIMENSIONS
PRESETTING )
Press 3. to carry out the balancing as usual
and to automatically store the program to the curren
tly selected user.
Press to select program 1 or 2 for subsequent
balancing operations without setting the dimensions again.
Use of the wheel balancer