CEMB USA C72_2SE EVO (B) - Manual (Page 19)

19
40 m
m
Use and maintenance manual Rev. 12-2009
ENGLISH
The number 353 ± 3° appears on the left display . 3.
Turn 4. the gauge downward position the round part
of the gauge terminal at 40 mm (radial distance)
from the flange as indicated in the figure; alternati
vely use one of the cones provided as shown in the
images
The nu 5. mber 254 ± 3° should appear on the left
display. The calibration is already correct.
If not, press the button holding the gauge still at
40 mm: the number 254 appears on the left display.
Return the gauge to rest position.
6.2.3 Width sonar (option)
Display the SETUP menu
P 1. ress to view the width sonar
CALIBRATION function.
Set with 2. the distance in mm betwe
en the Sonar sensor (0 sonar) and t he end of the
distance gauge (at rest).
A = Distance: Gauge at rest to 0 sonar
In the event of incorrect input in the width gauge calibration
function, press to cancel it.
Menu