CEMB USA C72_2SE EVO (B) - Manual (Page 17)

17
1
2
1
2
1
2
1
2
Use and maintenance manual Rev. 12-2009
ENGLISH
6.1.1 Self-diagnostics
The machine can perform self-diagnostics to check the
LED’s on the control panel and make sure the encoder
reads correctly.
To perform this operation, view the SETUP menu.
In the self-diagnostics sequence, all the LED’s on the panel
light up for a few seconds in order to check operation. When
the LED’s go out, the machine automatically moves on to the
encoder reading phase. When the wheel is turned manually
(forwards and backwards), the display shows its exact posi-
tion. The value lies between 0 (zero) and 255.
6.1.2 Type of display of unbalance phase
The type of display of the unbalance phase can be selected,
different from what is described in the manual to date.
Display the SETUP menu:
P 1. ress to view the unbalance phase
display function
P 2. ress to modify the type of unbalance
phase display and confirm
In this case the unbalance phase is indicated in the fol-
lowing way:
- Inside correction
- Outside correction
MEASURING RESULT OF SPLIT UNBALANCE:
Each weight to be applied has its own display (1 for the
inside and 2 for the outside in ALUS).
Unbalance inconsistent NOT in position
Correction position 1
Correction position 2
INFORMATION
The standard type of display is type 1, i.e. that
described throughout the manual.
Menu