CEMB USA C218 (A) User Manual
Page 7
I 0568 - 7
GB
5 - INDICATIONS AND USE OF THE WHEEL BALANCER
The monitor shows several information and suggests various alternative ways of use to the operator.
This is done through various “screens”.
5.1 - Initial screen
Buttons enabled
: main functions screen (see
MENU ACCESS DIAGRAM
)
:
type
of
STATIC
correction
:
balancing
spin
(see
RESULT OF MEASUREMENT
)
Dimensions gauge : when extracted, the Dimensions screen is selected (see
PRESETTING OF WHEEL DIMENSIONS
).
If the machine remains on the initial screen for a certain amount of time without being used, the system is automati-
cally switched to a screen-save. Striking of any key, movement of the wheel or distance + diameter gauge will cause
automatic switching from the screen-save menu to the initial screen.
5.1.1 - Screen-save screen
N.B.:
Name of the wheel balancer’s owner. Can be preset via the monitor (see section
PRESETTING
THE CUSTOMER AND USER NAME
).
- K22 Installation Manual (12 pages)
- K22 User Manual (20 pages)
- C206 User Manual (16 pages)
- C212 User Manual (20 pages)
- C218 User Manual (24 pages)
- C202 (25 pages)
- C29 User Manual (16 pages)
- K10 User Manual (16 pages)
- K8 (18 pages)
- K9 (20 pages)
- K11 User Manual (20 pages)
- C71_2 evo (F) User Manual (24 pages)
- C71_2 SE evo (B) (22 pages)
- C71_2 evo (D) User Manual (24 pages)
- C73-L (B) (28 pages)
- ER60 User Manual (22 pages)
- ER80 User Manual (24 pages)
- ER85 User Manual (28 pages)
- ER100 (80 pages)
- DWA 1000XLT (65 pages)
- SM900 (50 pages)
- SM56T (70 pages)
- SM935 (58 pages)
- SM915 (48 pages)
- SM915 Maxi (50 pages)
- SM825 (50 pages)
- C65 (E) (25 pages)
- C65 (F) (25 pages)
- C65 (G) (24 pages)
- C61 (D) (20 pages)
- C212 (A) (15 pages)
- C211 (C) (20 pages)
- C206 (A) (20 pages)
- ER100 (A) (72 pages)
- ER100-i (B) (86 pages)
- ER80 (A) (24 pages)
- ER80 (B) (24 pages)
- ER80 (C) (24 pages)
- ER80 (D) (24 pages)
- C88 (A) (39 pages)
- C88 (B) (39 pages)
- C88 EVO (C) (32 pages)
- C68SE (B) (32 pages)
- K9 (A) (20 pages)